An error occurred while reconnecting to \\\ Microsoft Windows Network: The local device name is already in use. This connection has not been restored.

you just did not wait long enough,, that's all. just find out which system is your master browser first, go to DOS box and typr these two line in:

nbtstat -RR (Enter)
nbtstat -R

at that point you master browser should recognize your new connection.

cheers

Courtesy :
snowmonkey
http://www.softwaretipsandtricks.com/forum/windows-nt-2000-2003/4052-error-occurred-while-connecting-m-ph-dwj-shared-local-device-name-already.html

How to install HP LaserJet 1200 for Win7 (Printer shared by other machine)

Windows 7 64bits and HP LaserJet 1200 driver via network perfect fix:
1. Control Panel ---> Devices and Printers
2. Add a printer
3. Add a local printer
4. Create a new port ---> use (Local port) ...next
5. Port name ---> type printer location: type (\\FIN-PC\HPLaserJ) ...next
6. Install printe driver ... select (Windows Update)... wait for some minutes and more
7. Select 'HP'... then 'LaserJet 1200 PCL 5' from the list... next
8. Wait for some minutes or more... life would not be this simple if you don't try.

Courtesy : McNeal

Print Redirection

Easy Print Redirection was available for Windows Server 2008 TS only and it was not available when connecting to computers running Windows Vista. Now it will also be available when connecting to Ultimate/Enterprise editions of Windows 7 and Windows Server 2008 R2 Remote Desktop Session Host servers.

The setting “Use Remote Desktop Easy Print printer driver first” must be set to “Enabled” for Easy Print redirection, and it has to be “Disabled” for Legacy Print. For “Not configured”, Easy Print is chosen by default.
The policy location is “Computer Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.

The Redirect only the default client printer policy setting allows you to specify whether the default client printer is the only printer that is redirected in Terminal Services sessions.

The policy location is Computer Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection -> Redirect only the default client printer

For details:

Printer Redirection
http://technet.microsoft.com/en-us/library/cc731963(v=WS.10).aspx

Hope this helps!
Best Regards
Elytis Cheng

Windows 7 32-bit Driver for HP LaserJet 1010

Just plug-in your LJ 1010, click Start, select Devices and Printers, select Add Printer, select port DOT4_001, click Windows Update and take HP LaserJet 3055 PCL5 (HP). At the end, type your custom name "HP LaserJet 1010". That's all!